Features:
Provides eight I/O ports.
Each I/O port contains.
Port address selectable.
Standard assignment to connect to expansion board.
Suitable for Windows 95/98/NT.
Package:
8 channel industrial
control board.
User's manual.
Software.
Features:
Support 8 SSR output channels and 8 logical output channel.
The SSR operation characteristic are similar to relay.
Provides more than 12 types of SSR output module.
LED indicates when signal is energized.
Built-in screw terminal for easy wiring.
Maximum sink current ot logical output channel is 100mA.
Maximum voltage of logical output channel is 100mA.
Screw terminal : accept #22 to # 12 AWG wire.
Package:
8 channel SSR/logical
output board.
User's manual.
One 26-pin flat cable.
Features:
Support 16 opto-isolated input channels.
LED indicates when input channels is activated.
Internal and external power selectable.
Bulit -in screw terminals for easy wiring.
Allow the inout signal to be completely floated and prevent the ground loops.
Isolated or non-isolated modes selectable.
Input signals are buffered with voltage comparators.
Input threshold voltage adjustable.
Breakdown voltage: 1500V VDC.
Screw terminal: accept #22 to #12 AWG wire.
Input current : 80mA maximum for each isolated input.
Input voltage: 30 mA maximum for each isolated input.
Package:
16 channel photo
isolator input board.
One 26-pin flat cable.
User's manual.
Features:
32 bit PCI bus with Plug and Play (PnP) features.
Provides four I/O ports.
Each port contains 16 digital I/O lines, total 64 I/O lines.
Standard signal assignment to connect to expansion board family.
Provides DII device driver for PnP features.
8
RELAY OUTPUT 8 PHOTO ISOLATOR INPUT BOARD Features:
1.Relay Output Function.
Support 8 SPDT relay channel.
LED indicates when relay is energized.
Internal and External power selctable .
Bulit -in screw terminals for easy wiring.
The Normal Open (No), Normal close(NC), and common comtacts (COM) of each
relay are brought out to the screw connector.
Max contactrating:150V/DC 2 amp, 125V/AC 2amp.
Breakdown voltage:AC/DC 500V minimum.
Relay on time : 3 ms typical.
Relay off time : 2 ms typical.
Total switching time : 10 ms typical.
Insolation resistance: 100M OHM minimal.
Life expectancy : 5 million operation at full load.
Screw terminal: accept #22 to #12 AWG wire.
Power consumption:.
. +12V: 40mA for each relay, total 0.55 amp for all relays are energized.
. +5V: <.2 amp.
-12V: <0.1 amp.
2.Isolator Input Function
Support 8 opto-isolated input channels.
LED indicates when inpit channel is actuvated.
Internal and extenal power selectable.
Built in screw terminal for easy wiring.
Allow the input signals to be completely floated and prevent the ground
loops.
Isolated or non isolated modes selectable.
Input signals are buffered with voltage comparators.
Input threshold voltage adjustable.
Breakdown voltage:1500 VDC.
Screw terminal : accept #22 to #12 awg wire.
Input current : 80mA maximum for each isolated input.
Input voltage : 30VDC maximum for each isolated input.
Features:
1.Relay Output Function.
Support 16 SPDT relay channel.
LED indicates when relay is energized.
Internal and External power selctable .
Bulit -in screw terminals for easy wiring.
The Normal Open (No), Normal close(NC), and common comtacts (COM) of each relay are brought out to the screw connector.
Max contactrating:150V/DC 2 amp, 125V/AC 2amp.
Breakdown voltage:AC/DC 500V minimum.
Relay on time : 3 ms typical.
Relay off time : 2 ms typical.
Total switching time : 10 ms typical.
Insolation resistance: 100M OHM minimal.
Life expectancy : 5 million operation at full load.
Screw terminal: accept #22 to #12 AWG wire.
Power consumption:.
. +12V: 40mA for each relay, total 0.55 amp for all relays are energized.
. +5V: <.2 amp.
-12V: <0.1 amp.
